The DNR900A is a dual functionality device, operating as either a Receiver or Repeater in the DataNet network.
When configured as a Receiver, the DNR900A is the gateway between the PC and devices joined to the wireless DataNet network. Connected to the PC via a mini-USB cable, each Receiver manages a single network supporting all DataNet models, and is powered by the DataSuite data analysis software. More than one Receiver may be connected to the PC, thereby supporting monitoring of multiple DataNet networks using a single DataSuite installation.
When configured as a Repeater, the DNR900A may be deployed to increase the effectiveness and robustness of the mesh network by providing multiple transmission routes between logger and PC. And the DNR900A's long transmission range can be leveraged to increase the overall network range, for relaying data from loggers located far from the PC.
Key product benefits:
INPUT TYPES |
|
None |
|
OUTPUT TYPES |
|
Dry Contact Alarm Output |
|
RF NETWORK COMMUNICATION |
|
|
• Frequency: 2.4 GHz • Units per network: Up to 65,000 • Data rate: 250 Kbps • Full mesh network architecture supported • 128-bit network security encryption • Worldwide license-free • RF Transmission: 17 dbm |
HARDWARE SPECIFICATIONS |
|
Display/Keypad |
• 2-row LCD with 16 character display • 2-button keypad for standalone operation |
Power Supply
|
• Internal rechargeable 4.8 V 800 mAh NiMH battery • External 12 V DC input @ 300 mA 3.6 VA • Back-up battery life: Approximately 3 hours |
DNR900 PC Interface |
• USB 2.0 compliance • Mini USB type B cable |
Operating Temperature Range |
-20 to 50 ˚C |
Casing |
• Plastic ABS box • Dimensions: 9.7 x 9.3 x 2.7 cm • Weight: 200 g • Table and wall mounting |
Standards Compliance |
• CE, FCC, IC Canada • Water and dust proof: IP54 |